EDM Easy Set-Up
Easy Set-Up Newly Designed Work Table MM-UP/M-HP Series
Square tables equipped as standard
All models are equipped with square-type work table as standard.Since workpiece set-up is possible at the back of the table, workability can be improved.Work table insulation specification is available for MMUP series only. (Not applicable to M-HP series.)
Y axis stroke has been extended by 50 mm to expand the cutting range.By setting two plates, whereas only one plate could be set in the past, which contributes to productivity improvement.
-
*
The back of the table is just for support.
The accuracy of top surface flatness is not guaranteed. - * Work table insulation specification is available for MMUP series only.
3D Level Adjust
Automatic correction for vertical accuracy
Three points on the upper face of workpiece can be measured with high precision touch probe sensor mounted on the upper head. It is possible to adjust the wire alignment automatically with reference to the workpiece inclination to the work table. Spark positioning and horizontal adjustment jig becomes unnecessary due to this function, which reduces set-up time.
Option 3D Level Adjust Plus
Shape measurement after cutting can be performed by adding software to this option.
Start hole device
SHM = Simple type start-hole cutting device
SHM2 is a start-hole drill that can be easily mounted on a machine. Hole-drilling is possible for hardened workpiece or tungsten carbide (WC).
Features of Hole Drill Taro
- ◆Standard Φ1.0 pipe electrode
- ◆Max. workpiece thickness 60mm
- ◆Drilling speed 10mm/min (SKD11)
- ◆Setting operation cutting conditions can be easily performed using a dedicated operation screen.
-
◆Applicable electrode diameter :
Φ0.3, Φ0.5, Φ0.8, Φ1.0, Φ2.0, Φ3.0
| Electrode diameter |
SKD11 | WC | ||
|---|---|---|---|---|
| Maximum drilling height (mm) |
Average drilling speed (mm/min) |
Maximum drilling height (mm) |
Average drilling speed (mm/min) |
|
| Φ3.0 | 60 | 5.0 | 40 | 1.5 |
| Φ2.0 | 60 | 7.0 | 40 | 3.0 |
| Φ1.0 | 60 | 10.0 | 40 | 4.0 |
| Φ0.8 | 40 | 4.0 | 20 | 2.5 |
| Φ0.5 | 10 | 3.0 | 10 | 1.0 |
| Φ0.3 | 5 | 0.5 | 5 | 0.5 |
The maximum machining height is the workpiece thickness that can be machined with one electrode of 300 mm.
Contact Us
Please feel free to contact us with any questions about our products or
to request a tour of our factory.
