EDM Reliable feeding technology
Reliable feeding technology Thin wire travel SMM80B/MM75B/MM-UP Series
Twin tension dancer roller
Through improvement in the wire tension system, we have achieved stable tension and reduced vibration when the wire is traveling. This has improved the cutting surface quality during finish cutting.
AWF
Greatly improved automation efficiency
We have used the anneal dry method consistently since 1981.
In recent years, we developed functionality that allows annealing in a fixed position without rotating the rollers. We are continuing advances that increase the wire feeding rate. This feature is essential for increasing the utilization rate and for automation of wire EDM.
All-in-one AWF
Feed at wire break point
Wire can be reliably threaded even at the break point. This is an essential function for core stitch® cutting.
Friction sensor
Using Seibu's patented "Friction sensor" technology, the wire can thread reliably through a start hole or slot. (PATENTED)
Friction Sensor Wire Feeding System
Wire feeding in water
It is possible to thread wire in water, through slot due to anneal dry method.
Thin wire feeding
It contributes to the automatization of microfabrication.
Skip figure function
Automatic operation can continue without stopping even at an unexpected trouble.
Various functions
Reliable feeding to difficult workpiece
It is possible to feed automatically through the slit of comb-shaped workpiece with annealing and friction sensor.
Round diamond die guide
A Round guide is used that focuses on cutting accuracy.
(Common to the upper and lower guides)
Jet feed guide
Water jet (option) is flushed from upper head nozzle to enhance the success rate of feeding.
(Guides are not common to upper and lower guide.)
Contact Us
Please feel free to contact us with any questions about our products or
to request a tour of our factory.
